CompuStar - RF-2W703-SH - Car Alarm Accessories


Includes a 2way LCD PAGING transmitter and a 1way spare remote for 2nd driver - Start engine / stop engine - 2way remote confirms lock/unlock/start. 

Separate buttons for lock & unlock  -  Includes Remote door locks and trunk release **  - Flashing Parking Lights



Remote Start Features

  • Remote Start

    Remote Start:

    Get a head start on the weather outside by remote starting your engine.

  • 2-Way

    2-Way LCD Confirmation:

    Get instant confirmation from your vehicle whenever you send a successful remote command.

  • Cold/Hot Automatic Start

    Cold/Hot Automatic Start:

    Set your vehicle to automatically start at a certain time or temperature.

  • Manual Transmission Starting

    Manual Transmission Compatible:

    Compustar Remote Starters can be safely installed on most manual-transmission vehicles.

  • Diesel Engine Starting:

    Diesel Engine Compatible:

    Compustar Remote Starters will work on vehicles with diesel engines.

  • Turbo

    Turbo Timer:

    Keep your engine running in idle to prevent premature turbo wear.

Keyless Entry Features

  • Lock


    Secure your vehicle by locking your doors. Activate by pressing lock button.

  • Unlock


    Access your vehicle by unlocking your door. Activate by pressing unlock button.

  • Trunk


    Pop your trunk by holding the Trunk Release button for 2.5 seconds.

  • Siren


    If your Compustar system has been connected to an alarm, holding the lock button will trigger the siren.

Convenience Features

  • 2nd Car

    2nd Car Mode:

    Switch between vehicles easily using one remote by switching into 2nd Car Mode.

  • Valet Mode

    Valet Mode:

    Turn off remote start settings whenever you submit your vehicle for servicing or valet.

  • Clock/Alarm


    This Compustar remote features an internal clock and alarm.

  • Vibration


    Mute your remote and set your remote alerts to vibrate.

  • Run-Time Indicator:

    LCD Screen:

    Check your vehicle's status and runtime via the remote LCD.

  • Signal

    Remote Signal:

    This icon on your LCD indicates that you are within range of your vehicle.

  • Aux Mode

    Auxiliary Mode:

    Customize your Compustar remote starter to control features such as heated seats using Aux functions.


  • For Keyless Entry functionality vehicle must be equipped with power locks or actuators must be added at extra cost.
  • For Remote Trunk functionality vehicle must be equipped with power trunk feature


Do 2-Way starters indicate that the is engine on?
Yes, our 2-Way remote starters turn on the vehicle’s parking lights to indicate that the vehicle has been remote started, and the LCD REMOTE confirms locks and start audibly and visually on the remotes display.  You don't need to look at the vehicle to see if it started.

Is the vehicle safe from theft when remote started?
YES,  If at any time the brake pedal is pressed while the vehicle is remote started the engine immediately shuts off.  Also, when remote started, the doors remain locked.

Can your starters work with Diesel engines?

How does the remote starter turn on heat?
To have heat turn on when you remote-start your vehicle simply pre-set the blower and temperature settings prior to leaving the vehicle.  The next time you start your vehicle with the remote, the heat will turn on to the pre-set level.


Can your starters work with manual transmissions?
Yes, however, manual transmission installations require add’l labour, at extra charge.

Can I have keyless entry if I don’t have power locks?

We can, however, we must install power lock motors,  if your locks are not power equipped (extra charge applicable).

Do you disable factory-installed anti-theft devices?

No.  Instead, our technicians use the latest technology to allow our systems to seamlessly integrate with factory anti-theft devices (i.e. transponder keys, Passlock, etc.).  On rare occasions you may be required to provide an extra key which will be used in the integration process (key will not be returned as it becomes a physical part of the integration device).